Posts

MOTU 8pre 16×12 FireWire Audio Interface Standard

MOTU 8pre 16x12 FireWire Audio Interface Standard
$549.00

Condition: New

FireWire audio interface for Mac and Windows – provides 16 inputs with 8 mic preamps and 12 outputs including separate phone and main outs for all the basic I/O you need for a powerful desktop studio.. Eight XLR/TRS "combo jack" mic inputs – connect up to eight mics, or mix and match mics with guitars, synths, drum machines and other analog input signals.. Flexible analog inputs – each provides a crystal-clear preamp (for both the XLR and TRS input), 24-bit 96 kHz converters, individually switchable 48-volt phantom power, 20 dB pad and front-panel trim controls. Mix and match condenser and dynamic microphones as your needs require.. Eight channels of ADAT optical I/O – provides two sets of optical connectors to provide eight channels of optical digital I/O even at high samples rates (88.2 or 96 kHz).. Operates as an optical expander – connect the 8pre to any ADAT optical compatible device (another audio interface, a digital mixer, etc.) to add 8 additional mic inputs seam
MOTU 8pre 16×12 FireWire Audio Interface Standard

Drawmer DL 241XLR 2-Channel Compressor Standard

Drawmer DL 241XLR 2-Channel Compressor Standard
$775.00

New

Has features, displays and control functions that make it outstanding for broadcast, sound reinforcement, and recording applications.
Drawmer DL 241XLR 2-Channel Compressor Standard

Drawmer DS501 Power Gate Standard

Drawmer DS501 Power Gate Standard
$825.00

New

INPUT IMPEDANCE: 20Kohm
MAXIMUM INPUT LEVEL: +17dBu
OUTPUT IMPEDANCE: 50 Ohm (bal),
MAXIMUM OUTPUT LEVEL: +17dBu
BANDWIDTH: <23Hz to 31KHz -1dB
NOISE AT UNITY GAIN reference 0dB, gate open:
Wideband 22Hz – 22KHz CCIR ARM IEC A Q-Pk CCIR
AV -90dB -95dB -95dB -97dB -84dB
RMS -88dB -93dB -93dB -95dB –
DISTORTION: 100Hz 1KHz 10Khz
0dB input < 0.025% < 0.025% <0.025%
POWER REQUIREMENTS: 93-125Volt or 185-260Volt at 50-60Hz, 9 Watts
FUSE RATING: 32mA for 230Volt, 63mA for 115Volt
CONFORMING TO BS EN 60127-2:1991 SHEET III
FUSE TYPE: 20mm x 5mm, Class 3 Time delay, 250Volt working
CASE SIZE: 482mm (w) x 44mm (h) x 200mm (d)
WEIGHT: (incl packaging) 3.4 Kgs
.
Drawmer DS501 Power Gate Standard