Behringer EUROPOWER EPX3000 Stereo Power Amp Standard

$399.99

“Stereo Mode (both channels driven): continuous average output power per channel. 500W @ 8 Ohms / 20 Hz – 20 kHz (0.1% THD) . 850W @ 4 Ohms / 20 Hz – 20 kHz @ 0.1% THD:. 1400 W @ 2 Ohms /20Hz – 20 kHz (1% THD) . Bridged Mono:. 1800W @ 8 Ohms, 8Ohms/ 1kHz @ 0.1%THD. . 2800 W @ 4 Ohms / 20 Hz – 20 kHz (1% THD) . 3,000W @ 4 ohms / 1kHz (1%THD). Distortion: <0.01%. Frequency Response (at 10dB below rated output power): 20Hz to 20kHz, +0/-1 dB. 5Hz to 50kHz (at -3dB points). Damping Factor (1 kHz and below): >400 @ 8 Ohms. Signal to Noise (20 Hz to 20 kHz). EPX3000 >100 dB. Voltage Gain: 32 dB. Input Sensitivity 1.17V. Input Impedance: 10 kOhms unbalanced / 20 kOhms balanced. Controls. Front: AC switch/ gain controls for each channel. Rear: MONO, X-Over, Limiter, Bridge mode . X-Over FX 100Hz, 12dB slope. Limiter Type: VCA CLIP Limiter, switchable Indicators. Connectors. Input: Active balanced XLR (pin 2+), 1/4″” TRS. Output: Touch-proof binding posts / speaker conn”
Behringer EUROPOWER EPX3000 Stereo Power Amp Standard